Do you want to recharge your Mojec Microstar prepaid meter and don’t know how to go about it? This can be quite confusing for those who are using it for the first time without adequate information.
However, trust me, the process can be quite simple and with a little guide here and there, you would be able to navigate your way easily without breaking a sweat.
Once you have purchased and used your Mojec prepaid meter, your next step should be visiting any electricity provider outlet you feel is trustworthy or you can opt for any online vending platforms.
Some of these online vending platforms include Unified Payment, Interswitch, and other vending platforms. Walk with us as we give you a detailed guide on how to recharge your Mojec prepaid meter.
How To Load Your Mojec Prepaid Meter
There are two ways of recharging your Mojec prepaid meter and the two methods are quite easy and effective. Here are the two ways you can load your Mojec prepaid meter:
If You have Exhausted Your Unit
If you have exhausted your whole unit, the process can be a long one; hence, it’s advisable not to exhaust your unit. Here is how to go about the recharging process:
1. You need to make sure that there is an EKEDP power supply in your neighborhood.
2. Check if the red flag on your meter is on, if not, turn it on.
3. The next step is to put off your generator and inverter, then change over to the EKEDP power supply. You need to keep in mind that there won’t be any power supplied to your house since you have exhausted your unit.
4. You would have to put in new Duracell batteries in the open space meant for it at the back of your meter keypad. This would help power on the device and if the device doesn’t power on, you would have to click on 3 to power the device.
5. Plug your keypad into a wall socket that can power up to 13 amps. You have to make sure that the switch is on.
If You have Units on Your Meter
1. If you have units remaining on your meter, you only have to take these few steps to recharge your prepaid meter:
2. Once you have an EKEDP power supply in your home, plug the keypad into your wall socket.
3. Your next step is to switch on the wall socket to power on the keypad.
4. As soon as it’s powered on, you can easily load your 20 digits token.
Once you take the above-discussed two steps, you can easily recharge your Mojec prepaid and of course, subsequently, there won’t be the need for an outside hand while recharging the Mojec prepaid meter.
Conclusion
The recharging process for Mojec prepaid meters can be very simple and you don’t need to break a sweat while attempting it.
If you want to recharge a Mojec prepaid meter and don’t know how to go about it, we made a well-detailed guide on how to recharge your Mojec prepaid meter.